Laser-ready SVGs from any image
PNG, JPG or WebP in; clean closed vector shapes out. Ready to cut, score or fill-engrave in LightBurn, xTool Creative Space and other laser software.
or drop or paste it here
PNG, JPEG, GIF, BMP, TIFF, or WebPLaser-ready settings: one or two colors, downloaded as cut outlines. Switch to filled shapes for engraving.
Convert and preview free. Pay 1 credit only when you download.
Why SVG Me
Cut lines you can trust
Closed shapes follow the outline of your design, not a halo of stray pixels.
Engrave and cut from one file
Keep a few colors to split cut and engrave work, or one for a single cut.
Scale to your material
Resize for a coaster or a wall panel without losing edge quality.
Downloading unlocks the project for 1 credit. After that, every version recolors and downloads again free. Sign in with Google or email to buy credits and keep your SVGs.
How to do it
- Upload a PNG, JPG or WebP. Laser settings keep the design to one or two colors.
- Download "Cut outlines" to cut or score, or "Standard" filled shapes to fill-engrave.
- Import the SVG into your laser software (in LightBurn, File › Import) and assign each color to an operation.
- Size it to your material and run a test on scrap first. LightBurn guide
Cut outlines or filled shapes?
- Cut outlines are unfilled strokes around every shape, with white (usually the material itself) left out. Use them for cutting through and for scoring. In LightBurn they come in as Line layers.
- Standard filled shapes keep every region solid. Use them for fill engraving, where the laser scans back and forth across each shape. In LightBurn, set those layers to Fill.
- Both from one file: keep two colors, cut one and engrave the other. Switching the download format never costs another credit.
Why node count matters on a laser
A trace that follows the pixels puts an anchor point at every stair-step of an edge. On a laser that means the head slows down and speeds up at every point: jobs take longer, curves come out faceted, and burn marks collect where it hesitates. SVG Me fits smooth curves instead, so the same outline needs far fewer points. The table below counts them for this page’s example.
If a file from elsewhere has too many nodes, LightBurn’s Optimize Shapes tool can reduce them, but it can’t restore the curve a stair-stepped trace already lost. Starting from a clean trace is easier.
LightBurn, xTool and the rest
- LightBurn: File › Import, or drag the SVG onto the workspace. Each color lands on its own layer, so set one to Line and one to Fill. Check that the size came in right before you frame the job.
- xTool Creative Space: import the SVG and set each shape to cut, score or engrave.
- Glowforge: see the Glowforge converter, which uses the same laser settings.
- Inkscape and other editors: the SVG is made of plain paths, so you can edit nodes or add a frame before sending it to your laser.
Tested on this exact design
We shrank the example above to 200 px, saved it as a low-quality JPEG, and traced it with SVG Me and two popular free tracers at their default settings. How we tested
| Lower is better | SVG Me | VTracer | Potrace |
|---|---|---|---|
| Difference from the originalaverage per pixel, 0–255 | 1.4 | 7.5 | 4.6 |
| Anchor pointsfewer means smoother cuts | 140 | 1,250 | 1,613 |
| Colorseach one is a layer to cut | 2 | 133 | 8 |
| Stray specksshapes under 4 px, to weed | 0 | 0 | 74 |
| File sizesmaller loads faster | 7.2 KB | 94 KB | 63 KB |
Questions
Which laser software does it work with?
Any that imports SVG, including LightBurn, xTool Creative Space, the Glowforge app and Inkscape.
Why are white areas missing from the cut outlines?
White is usually the material itself, so cut outlines leave it out. Download the Standard filled shapes to keep every region.
Can I cut and engrave from one file?
Yes. Keep two colors and assign one to a cut or line operation and the other to engraving.
Should I trace a photo for engraving?
No. For photo engraving, engrave the original image. Tracing a photo turns it into many small flat shapes.
Does it work with diode and CO2 lasers?
Yes. The SVG describes shapes, not machine settings, so it works with any laser your software drives. Power and speed are set in the software, per layer.
